Spelaanbod en Spelproviders

Met een indrukwekkende bibliotheek van meer dan 3.000 titels, positioneert Ace Spinz zich als een serieuze speler in de huidige markt. Waar veel vergelijkbare platforms blijven steken bij een beperkter aanbod, biedt dit casino een brede variëteit aan categorieën. U vindt hier speciale secties voor Feature Buy slots, crash games en een volwaardig live casino. De samenwerking met meer dan 100 softwareleveranciers, waaronder Pragmatic Play, Hacksaw Gaming en Relax Gaming, garandeert kwaliteit. Ace Spinz

De lobby is logisch ingedeeld met tabbladen zoals Last Played en Trending, wat navigeren vergemakkelijkt. Vergelijkt men dit met het aanbod van de gemiddelde Curacao-gelicentieerde operator, dan valt de focus op niche-categorieën zoals Crash & Instant op. Titels als Aviator en JetX zijn direct beschikbaar voor snelle actie. Voor spelers die van variatie houden, is dit een sterk punt. Het spelaanbod is gebalanceerd tussen bekende klassiekers zoals Book of Dead en modernere titels zoals Le Bandit. Winnaar voor variatie: Ace Spinz.

Ace Spinz Casino in 2026 Wat Er Is Veranderd

Welkomstbonussen en Promoties

Het welkomstpakket is royaal te noemen met een totaal van 3.000 euro en 250 gratis spins over uw eerste drie stortingen. Bij de eerste storting ontvangt u een 200 procent bonus tot 1.000 euro. Ter vergelijking: veel andere top-5 operatoren bieden vaak slechts een 100 procent match. U moet echter rekening houden met de inzetvereiste van 40x de bonus. Dit cijfer ligt iets boven het gemiddelde van 35x dat u bij concurrenten ziet, maar de hogere match-procenten compenseren dit voor veel gebruikers.

Naast het welkomstpakket biedt het platform een wekelijkse vrijdag-reload van 50 procent tot 1.000 euro. Voor de actieve speler zijn de maandag-free spins op Gates of Olympus 1000 een fijne toevoeging. Alle bonussen hanteren een maximale inzet van 5 euro. De bonusstructuur is helder, al zijn de inzetvereisten voor sommigen aan de hoge kant. Winner voor bonuswaarde: Ace Spinz. Winner voor voorwaarden: toss-up.

Waarom Ace Spinz Casino zo populair is onder spelers

VIP Programma en Loyaliteit

De Ace VIP Club onderscheidt zich door een beloningsstructuur die gericht is op actieve spelers. U krijgt hier dagelijks tot 25 procent cashback. Wat dit programma echt interessant maakt, is dat deze cashback en bonussen in contanten worden uitgekeerd. Er zijn geen verborgen addertjes of complexe inzetvereisten verbonden aan deze beloningen. Dit is een groot voordeel ten opzichte van concurrenten die cashback vaak omzetten in bonusgeld met strikte regels.

Het is duidelijk dat het loyaliteitssysteem is ontworpen om langdurige spelers te binden. De beloftes van wager-vrije contante beloningen zijn in deze sector zeldzaam. Voor spelers die op zoek zijn naar transparantie, is dit een uitstekende keuze. Het systeem voelt persoonlijker aan dan de standaard punten-spaarprogramma’s van de meeste andere casino-sites. Winner voor transparantie: Ace Spinz.

Sportweddenschappen en Live Sectie

Naast het casino biedt het platform een volledig geïntegreerd sportsbook met meer dan 30 sportcategorieën. Of u nu wedt op voetbal, basketbal of de groeiende markt van eSports, het aanbod is ruim. U heeft toegang tot diepgaande markten zoals Asian Handicaps en speler-props. Voor eSports-liefhebbers is de toevoeging van live statistieken en streams van titels als CS2 en Dota 2 een sterke troef.

In het live casino vindt u 24/7 actie met professionele dealers in HD-kwaliteit. De keuze uit Blackjack, Roulette en diverse Game Shows matches met de top van de markt. Waar sommige platforms sport en casino strikt scheiden, biedt dit casino een naadloze overgang tussen beide werelden. Het sportsbook is robuust genoeg om zelfstandig te concurreren met gespecialiseerde bookmakers. Winner voor breedte: Ace Spinz.

Betaalmethoden en Transacties

De betalingsopties zijn geoptimaliseerd voor snelheid en diversiteit. U kunt storten via Visa, Mastercard, MiFinity, Skrill, Neteller en verschillende cryptovaluta zoals BTC en USDT. Alle stortingen zijn gratis en verlopen direct. Het minimale stortingsbedrag van 20 euro is marktconform. Wat betreft uitbetalingen valt op dat crypto-opnames vaak binnen een uur verwerkt worden.

Methode Min. Opname Verwerkingstijd
Bankoverschrijving 30 euro 1-3 dagen
MiFinity/E-wallets 20 euro Onder 24 uur
Crypto (BTC/USDT) 20 euro Onder 1 uur

Vergeleken met de standaard 3 tot 5 dagen bij banktransfers op andere platforms, is de verwerkingstijd voor crypto hier aanzienlijk sneller. De minimale opname bij bankoverschrijving ligt met 30 euro iets hoger, maar dit blijft binnen acceptabele grenzen. Winner voor snelheid: Ace Spinz.

Gebruikerservaring en Klantenservice

Het platform maakt gebruik van een modern, donker thema met een vriendelijke meerkat als mascotte. De mobiele ervaring is uitstekend dankzij een responsive design voor iOS en Android. U kunt zelfs een Progressive Web App installeren voor snelle toegang vanaf uw startscherm. De navigatie is intuïtief, met alle belangrijke secties zoals Support en Promotions duidelijk in het linkermenu geplaatst.

Mocht u vragen hebben, dan is de klantenservice 24/7 bereikbaar via live chat. De ondersteuning wordt aangeboden in meerdere Europese talen, wat een groot pluspunt is voor internationale spelers. Hoewel de meeste casino’s een dergelijke chat aanbieden, is de reactietijd hier bovengemiddeld snel. De algehele gebruikerservaring voelt professioneel aan zonder dat het complex wordt. Winner voor UX: Ace Spinz.

Dual Channel SCR Driver Board 0421002

Features

  • Dual-channel SCR driver
  • Works with 12V DC external supply
  • Interface for 3.3 V to 15 V logic level
  • Available in versions with peak gate current up to 1A and working voltages up to 1000V
  • Controller is isolated from Power Circuit
  • Isolation between Two SCR drivers
  • High insulation rating (>3.2 kVAC) between the input (controller) and output (power)
  • LED indication for input power supply
  • LED indication for each pulse output
  • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
  • Overall dimensions – 97mm x 74mm
  • Available in 3 design variants as follows,
    • Variant 1 - On-board carrier generation, Mono shot and Pulse Amplifier Only Digital Command required from Main Control Board Power saving by use of Mono shot Best suited for Rectifier and ACVR applications.
    • Variant 2 - On-board carrier generation and Pulse Amplifier Only Digital Command required from Main Control Board Best suited for Static Switch applications, however, can also be used for Rectifier and ACVR applications (without power saving feature).
    • Variant 3 - Pulse Amplifier Best suited for all applications where both command and carrier generation are done by Main Control Board
The 0421002 is ideally suited for a wide range of SCR based systems including but not limited to following applications:
  • High current 6, 12, 18 and 24 Pulse Rectifiers for various applications like
    • Electroplating, Anodizing, Galvanising, Electro-coloring
    • Hydrogenation, Chlorination, Electrolysis
    • Electrochemical - Sodium, potassium salts o Electrophoretic painting,ED coating
    • Industrial Power Supplies
    • Battery Formation, Battery charging
    • Heating, Magnetisation, Ionisation
  • Wind-Power Converters
  • Industrial drives
  • Power-factor correctors
  • Welding Rectifiers
  • Uninterruptible power supplies (UPS)
    High Voltage Interface Board 0421001

    Features

    • Four-channel HVI
    • Filter capacitor for each channel
    • Channels suitable for 0-500V, 50Hz, AC Voltage Feedback
    • Channels suitable for 0-800V DC Voltage Feedback
    • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
    • Overall dimensions – 77mm x 46mm
      The 0421001 is ideally suited for a wide range of SCR/IGBT based systems including but not limited to following applications:
      • High current 6, 12, 18 and 24 Pulse Rectifiers for various applications like
        • Electroplating, Anodizing, Galvanising, Electro-coloring
        • Hydrogenation, Chlorination, Electrolysis
        • Electrochemical - Sodium, potassium salts
        • Electrophoretic painting,ED coating
        • Industrial Power Supplies
        • Battery Formation, Battery charging
        • Heating, Magnetisation, Ionisation
      • Wind-power converters
      • Industrial drivers
      • Power-factor correctors
      • Welding Rectifiers
      • Uninterruptible power supplies (UPS)









      Isolated Voltage Interface Board 0621001-01

      For the electronic measurement of voltages; DC, AC, Pulsed……,with isolation between the primary circuit (power) and the secondary crcuit (control),

      Features
      • Primary Voltage sensing upto ±600V
      • 4250-VRMS isolation for 1 minute
      • Differential Secondary output ±2V
      • Ambient operating temperature -25….+125°C
      • Single 3.3-V or 5-V supply with integrated DC/DC converter
      • Easy mounting
      • Small size and space saving
      • Excellent Accuracy
      • Very good linearity
      • Low Thermal Drift
      • High immunity to external interferences
      • Low power consumption
      • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
      • Overall dimensions – 85mm x 27.5mm
      The 0621001-01 is ideally suited for a wide range of industrial systems including but not limited to following applications:
      • High voltage Rectifiers for various applications
      • AC Variable Speed Drives
      • Servo Motor Drives
      • Static converters for DC motor drives
      • Power supplies for Welding application
      • Uninterruptible power supplies (UPS)
      • and many others









          Isolated Current Interface Board 0621001-02

          For the electronic measurement of voltages; DC, AC, Pulsed……,with isolation between the primary circuit (power) and the secondary crcuit (control),

          Features
          • Primary Current sensing upto ±250mV from shunt
          • 4250-VRMS isolation for 1 minute
          • Differential Secondary output ±2.05V
          • Ambient operating temperature -25….+125°C
          • Single 3.3-V or 5-V supply with integrated DC/DC converter
          • Supports a working voltage of up to 1.2 kVRMS
          • Easy mounting
          • Single design for wide current range
          • Excellent Accuracy
          • Very good linearity
          • Low Thermal Drift
          • High immunity to external interferences
          • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
          • Overall dimensions – 85mm x 27.5mm
          The 0621001-02 is ideally suited for a wide range of industrial systems including but not limited to following applications:
          • High current Rectifiers for various applications
          • AC Variable Speed Drives
          • Battery supplied applications
          • Static converters for DC motor drives
          • Power supplies for Welding application
          • Uninterruptible power supplies (UPS)
          • Switched Mode Power Supplies (SMPS)
          • and many others










            100 Pin Microcontroller Based Universal Control Board 0521002

            Features
            • 32-bit 100MHz IEEE 754 single-precision Floating-Point Unit (FPU) Trigonometric Math Unit (TMU) Programmable Control Law Accelerator (CLA) Configurable Logic Block (CLB) 256KB (128KW) of flash 100KB (50KW) of RAM
            • 16 Output channels which can be used as PWM, Pulse or Digital output
            • 22 ADC channels pre-configured for the following,
              • 9 ADC channels suitable for 0-500V, 50Hz, AC Voltage Feedback
              • 2 ADC channels suitable for 0-800V DC Voltage Feedback
              • 5 ADC channels suitable for 25mA-200mA DC Current Feedback from Hall Effect Sensor
              • 6 ADC channels suitable for 0-1A, 50Hz, AC Current Feedback from CT
            • 16 Digital channels (2 groups of 8 signals each), each group can be configured as Digital Input or Digital Output
            • 5 (3 Dedicated and 2 in sharing with ADC) Digital Inputs
            • Non-Isolated RS-485 FULL DUPLEX
            • Isolated CAN 2.0
            • Interface provision for following is available,
              • BiSS-C (part of DIO pins)
              • QEP (part of DIO pins)
              • SDFM (part of DIO pins)
              • DAC (part of ADC pins)
              • SINE/COS (part of ADC pins)
            • Works on single external 5V supply
            • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connectors, etc.)
            • Overall dimensions – 164mm x 163mm
            • Completely Software Configurable
              • All DIs can be configured as NO or NC
              • Mode selection (e.g. CV/CC, Auto/Manual, etc.)
              • Set points (e.g. over voltage, over current, etc.)

            Description


            The 0521002 is a state of the art, universal, digital control board. It has been designed to address numerous SCR/IGBT based power system challenges, allowing fast and economical product development and support. There is no longer a need to stock dozens of control board variants to meet your various product needs.

            With the 0521002, nearly every system parameter is software adjustable, providing you a single control board solution for all your needs. Configuration and operating parameters are easily modified using the AAVPL GUI Configuration & Control Tool. The GUI also makes field updates fast and easy.

            Systems operating from line voltages as high as 1000VAC are supported using the external HVI circuitry.
            The 0521002 is ideally suited for a wide range of SCR and/or IGBT based systems including but not limited to following applications:

            • High current 6, 12, 18 and 24 Pulse Rectifiers
            • Wind power inverters
            • Industrial motor drives
            • Railway auxiliary inverters
            • Induction heating
            • Photovoltaic inverters
            • Uninterruptible power supplies (UPS)
            • EV drives
            • EV charging stations
            • Power quality equipments (e.g. AHF, Statcom, etc.)
            • Static Frequency Converter
            The 0521002 can be easily interfaced with our following products typically required for SCR/IGBT based power systems,
            • Dual channel IGBT Driver Board 0721001
            • Dual channel SCR Driver Board 0421002
            • Four channel non-isolated High Voltage Interface Board 0421001
            • Single channel isolated Voltage/Current Interface Board 0621001




            80 Pin Microcontroller Based Universal Control Board 0222001

            Features

            • 32-bit 100MHz IEEE 754 Floating-Point Unit (FPU) Trigonometric Math Unit (TMU) Programmable Enhanced control peripherals Configurable Logic Block (CLB) 128KB (64KW) of flash 24KB (12KW) of RAM
            • 14 Output channels which can be used as PWM, Pulse or Digital output
            • 16 ADC channels pre-configured for the following,
              • 6 ADC channels suitable for 0-500V, 50Hz, AC Voltage Feedback
              • 2 ADC channels suitable for 0-800V DC Voltage Feedback
              • 2 ADC channels suitable for 100mA DC Current Feedback from Hall Effect Sensor
              • 6 ADC channels suitable for 0-1A, 50Hz, AC Current Feedback from CT
            • 16 Digital channels (2 groups of 8 signals each), each group can be configured as Digital Input or Digital Output
            • 5 (4 Dedicated and 1 in sharing with ADC) Digital Inputs
            • Non-Isolated RS-485 FULL DUPLEX OR Isolated RS-485 half duplex port
            • Isolated CAN 2.0
            • Interface provision for following is available,
              • BiSS-C (part of DIO pins)
              • QEP (part of DIO pins)
              • SINE/COS (part of ADC pins)
            • Works on single external 5V supply
            • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connectors, etc.)
            • Overall dimensions – 160mm x 130mm
            • Completely Software Configurable
              • All DIs can be configured as NO or NC
              • Mode selection (e.g. CV/CC, Auto/Manual, etc.)
              • Set points (e.g. over voltage, over current, etc.)
            Description

            The 0222001 is a state of the art, universal, digital control board. It has been designed to address numerous SCR/IGBT based power system challenges, allowing fast and economical product development and support. There is no longer a need to stock dozens of control board variants to meet your various product needs.

            With the 0222001, nearly every system parameter is software adjustable, providing you a single control board solution for all your needs. Configuration and operating parameters are easily modified using the AAVPL GUI Configuration & Control Tool. The GUI also makes field updates fast and easy.

            Systems operating from line voltages as high as 1000VAC are supported using the external HVI circuitry.

            The 0222001 is ideally suited for a wide range of SCR and/or IGBT based systems including but not limited to following applications:
            • High current 6, 12, 18 and 24 Pulse Rectifiers
            • Wind power inverters
            • Industrial motor drives
            • Railway auxiliary inverters
            • Induction heating
            • Photovoltaic inverters
            • Uninterruptible power supplies (UPS)
            • EV drives
            • EV charging stations
            • Power quality equipments (e.g. AHF, Statcom, etc.)
            • Static Frequency Converter
            The 0222001 can be easily interfaced with our following products typically required for SCR/IGBT based power systems,
            • Dual channel IGBT Driver Board 0721001
            • Dual channel SCR Driver Board 0421002
            • Four channel non-isolated High Voltage Interface Board 0421001
            • Single channel isolated Voltage/Current Interface Board 0621001

















            Universal Power Supply Board 1121001

            Features
            • Input 1 – 290 to 500V, 50Hz, 3 Phase – 3 Wire, AC
            • Input 2 – 340 to 500V DC
            • Powe supply board works from any one of the inputs available or from both the inputs available simultaneously
            • Output 1 – 24V DC ± 1%, 2A
            • Output 2 – 5V DC ± 1%, 0.5A
            • Output 3 – 12V DC ± 1%, 2A
            • Output 4 – 12V DC ± 1%, 0.6A
            • Overcurrent Protection
            • Short circuit protection with auto recovery
            • Input to Output Isolation – 1.5KVAC for 1 minute
            • Input to Earth Isolation – 1.5KVAC for 1 minute
            • All 4 outputs isolated from each other
            • Operating Temperature - -20 to +60°C
            • Storage Temperature - -20 to +85°C
            • Euro Terminal Blocks. No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
            • Overall dimensions – 220mm x 140mm
            The 1121001 is ideally suited for any electrical, electronics and power electronics equipment requiring multiple power supplies.



















            Dual Channel IGBT Driver Board 0721001

            Features

            • Dual-channel IGBT driver for blocking voltages up to 1200V
            • Supply Under voltage protection
            • Built-in isolated supplies
            • +15 V (regulated) / -8 V gate driving
            • Interface for 3.3 V to 15 V logic level
            • VCESAT protection for both IGBTs
            • Independent or half bridge modes
            • Supports two-level and multi-level topologies
            • Active Miller Clamp
            • Controller is isolated from Power Circuit
            • Isolation between Two IGBT drivers
            • Soft turn-off
            • LED indication for input Power supply
            • LED indication for each PWM output
            • Euro Terminal Blocks (Vertical 3.81mm). No need of any special tools (crimping tool, etc.) or stocking/sourcing of mating halves (crimps, connector, etc.)
            • Mounting – Standalone mounting OR Soldered onto 17mm dual IGBT module
            • Overall dimensions
            The 0721001 is ideally suited for a wide range of IGBT based systems including but not limited to following applications:
            • Wind-power converters
            • Industrial drives
            • Power-factor correctors
            • Welding
            • Uninterruptible power supplies (UPS)
            • SMPS
            • Traction
            • Research
            • and many others
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure
            Kindly Fill the details to download Brochure